Unsolved
This post is more than 5 years old
25 Posts
0
13660
T620 w/ H710P Adapter - Getting MultiBit ECC Errors during high write loads
One of my T620's with H710P adapters has crashed 3 consecutive weekends in a row when it was receiving lots of data (dozens of VHD files) to be written. The system is Raid-5 with 5 SAS 600GB disks.
I am pretty sure all drivers are up to date. The system runs fine when under normal loads but has crashed under heavy loads 3 times now which is of obvious concern. Any suggestions other than contact Dell support and requesting a new adapter?
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
December 19th, 2014 15:00
Hello
What error are you receiving that indicates that the controller is crashing? Where are the multibit errors being reported from and what device are they reported against?
I would suggest that you review information from the system event/hardware log to see what is reported there. Also, if there are errors associated with the controller you should pull and review a controller log.
Thanks