PowerEdge HDD/SCSI/RAID

Last reply by 02-12-2022 Unsolved
Start a Discussion
2 Bronze
2 Bronze
273

What is my upgrade path for a T610?

Hello Everyone,

I have a PowerEdge T610 that originally came with a PERC6i, backup battery and 6 SATA HDDs but when i purchased it, all drives were removed. I am looking for a list of components to get to upgrade to 3 SATA 6gb SSD in RAID5 on 3.5" sled trays with 2.5" adapters with a RAID controller.

Replies (3)
260

Hi @Baldygb,

 

Unfortunately PERC6i is unable to support 6Gb/s rate, reference: https://dell.to/3fni6sV

 

The adapter conversion for 2.5" to be install on a 3.5" caddy would be DPN# 9W8C4. A couple of SSD DPN# 8C38W and 6R5R8 that are listed for T610.

 

I would recommend you to contact sales to check any other hardware that you need for your requirements. 


DELL-Joey C
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell

Did I answer your query? Please click on ‘Accept as Solution’. ‘Kudo’ the posts you like!

259

As Joey C mentioned PERC 6/i does not support 6 Gbps speed.

Below are list of SATA SSD supported on T610. These are 3 Gbps drives

24XV8SSDR,200GB,SATA,2.5,SMSNG,MLC
G613RSSDR,100GB,SATA,2.5,SMSNG
Y949PSSDR,50GB,SATA,2.5,SMSNG


Thanks,
DELL-Shine K
#IWork4Dell

3 Silver
209

For one, the Perc6i doesn't support HDDs bigger than 2 TB -- I assume you probably meant 6 TB here, though not sure if 3 x 6TB or 3 x 2TB: "upgrade to 3 SATA 6gb SSD" since I don't think that small SATA SSDs even exist.

For SSDs greater than 2 TB, you can use either the H700 (supported) or the H710 (not supported, but works).  You also need new cables to the backplane.

Latest Solutions
Top Contributor