George Luiz
1 Copper

Broadcom BCM5709 on ML610

Hi,

I have a half height ML610 blade server with a BCM5709 dual port network card and two PowerConnect M6220 switches attached to the A1 and A2 slots. Based on the Blade owner's manual the LOM will be attached to both A1 e A2 fabric slots, the switch port number will be the blade number in the enclousure. However this NIC has two ports, LOM1 e LOM2. Will the LOM2 network card be attached to these same slots and port numbers?

Thanks,

-George

0 Kudos