17 Posts
0
1709
Cable kit to remove PERC 6/i, backplane from T310
I want to remove the PERC 6/i RAID controller from my PowerEdge T310 so that I can connect my storage drives to the motherboard and use a software RAID. There aren't enough power connectors from the power supply to do this now. Is there a cable kit available so that I can do this?
Thanks.
DELL-Chris H
Moderator
Moderator
•
8.4K Posts
0
December 17th, 2018 05:00
I apologize, I pulled the wrong one. I believe the one you need is part Y688K, as seen below.
DELL-Chris H
Moderator
Moderator
•
8.4K Posts
0
December 12th, 2018 07:00
Compurescue,
I believe that the cable you're referring to is D385M, as seen below. It is the cabled hard drive cable.
Let me know if this is the cable you are indeed looking for.
compurescue
17 Posts
0
December 12th, 2018 21:00
That's not what I want. What you show there connects drives to a PERC 6/i card in a server that doesn't have a backplane. I want to connect my drives to the motherboard, not to the PERC 6/i.
Thanks.