Unsolved
This post is more than 5 years old
2 Posts
0
56967
Cache Battery 0 in controller 0 is Degraded (Non-Critical) [probably harmless]
Hello Dears,
I'm getting nagios alerts "Cache Battery 0 in controller 0 is Degraded (Non-Critical) [probably harmless] " from dell PowerEdge R710.
could you please suggest me what was the issue ? which would be helpful.
#omreport storage battery
List of Batteries in the System
Controller PERC H700 Integrated (Slot Embedded)
ID : 0
Status : Non-Critical
Name : Battery 0
State : Degraded
Recharge Count : Not Applicable
Max Recharge Count : Not Applicable
Predicted Capacity Status : Ready
Learn State : Due
Next Learn Time : 0 hours
Maximum Learn Delay : 7 days 0 hours
Learn Mode : Auto
DELL-Chris H
Moderator
Moderator
•
8.4K Posts
0
February 5th, 2013 06:00
Ganeshsha20,
This may be a false error. What is the driver and firmware showing for the H700?
Also, what is the state of the remaining system, anything else out of date as well?
Lastly, what is the OS you are using?
Ganesh Sha
2 Posts
0
February 5th, 2013 18:00
Thanks for the reply!please find the below details
#omreport storage controller
Controller PERC H700 Integrated (Embedded)
Controllers
ID : 0
Status : Ok
Name : PERC H700 Integrated
Slot ID : Embedded
State : Ready
Firmware Version : 12.3.0-0032
Minimum Required Firmware Version : Not Applicable
Driver Version : 00.00.04.17-RH1
Minimum Required Driver Version : Not Applicable
Storport Driver Version : Not Applicable
Minimum Required Storport Driver Version : Not Applicable
Number of Connectors : 2
Rebuild Rate : 30%
BGI Rate : 30%
Check Consistency Rate : 30%
Reconstruct Rate : 30%
Alarm State : Not Applicable
Cluster Mode : Not Applicable
SCSI Initiator ID : Not Applicable
Cache Memory Size : 512 MB
Patrol Read Mode : Auto
Patrol Read State : Stopped
Patrol Read Rate : 30%
Patrol Read Iterations : 90
Abort Check Consistency on Error : Disabled
Allow Revertible Hot Spare and Replace Member : Enabled
Load Balance : Auto
Auto Replace Member on Predictive Failure : Disabled
Redundant Path view : Not Applicable
Persistent Hot Spare : Disabled
Security Capable : Yes
Security Key Present : No
Spin Down Unconfigured Drives : Enabled
Spin Down Hot Spares : Enabled
Time Interval for Spin Down (in Minutes) : 30
OS version
CentOS release 5.5 (Final)