Highlighted
ptscon
Bronze

Cannot use a "Dell System PE 2950" BIOS in a " - "

Jump to solution

Cannot use a "Dell System PowerEdge 2950" BIOS in a " - "

 

^ Is the message I get after booting from a bios update floppy drive on my PE 2950.

Currently it has 2.2.6 BIOS and I'm trying to update it with 2.5.0

 

What can be causing this weird error?

 

Thanks

0 Kudos
10 Replies
Dev Mgr
Diamond

Re: Cannot use a "Dell System PE 2950" BIOS in a " - "

Jump to solution

If you're running Windows on the server, I'd suggest to download the Windows version of the bios update and run it from within the OS. If you're running Linux, get the Linux version. If you're running a different OS than those 2, download a Linux live CD (e.g. Ubuntu Desktop), and the Linux version of the bios update, boot to the Linux CD, put the bios update on a USB key and run it from within the Linux live OS.

 

As for the error itself, I'm not sure what that means.

Member since 2003

0 Kudos
ptscon
Bronze

Re: Cannot use a "Dell System PE 2950" BIOS in a " - "

Jump to solution

I tried running DUP updates with these three:

PE2950_BIOS_LX_2.3.1_1.BIN
PE2950_BIOS_LX_2.4.3.BIN
PE2950_BIOS_LX_2.5.0.BIN

They all failed once the system rebooted with "BIOS update attempt failed!"

Output from one of DUP executes:

 

******************

Collecting inventory...
.
Running validation...

BIOS

The version of this Update Package is newer than the currently installed version.
Software application name: BIOS
Package version: 2.5.0
Installed version: 2.2.6


Continue? Y/N:y
Executing update...
WARNING: DO NOT STOP THIS PROCESS OR INSTALL OTHER DELL PRODUCTS WHILE UPDATE IS IN PROGRESS.
THESE ACTIONS MAY CAUSE YOUR SYSTEM TO BECOME UNSTABLE!
.
The BIOS image file is successfully loaded. Reboot your system to complete the update. Do not shutdown, reset, power cycle or switch off your system before it has restarted.
Would you like to reboot your system now?
Continue? Y/N:y

Broadcast message from root (pts/0) (Mon May 11 15:12:19 2009):

The system is going down for reboot NOW!

******************

All seems fine until the reboot when it displays the update failure.

I also tried updating via IT Assistant and boot up floppy but they also failed.

 

Any ideas?

0 Kudos
Dev Mgr
Diamond

Re: Cannot use a "Dell System PE 2950" BIOS in a " - "

Jump to solution

If you have any PCI/PCI-X/PCIe cards in the server (especially cards not purchased with the server from

 

I'd suggest to call Dell Poweredge support as this may take a motherboard replacement to fix this kind of problem.

Member since 2003

0 Kudos
ptscon
Bronze

Re: Cannot use a "Dell System PE 2950" BIOS in a " - "

Jump to solution

Hmm, I did change the server hardware config from the shipped version.


Removed:

Intel NIC
4x3.5 Backplane
4 SAS 146GB HD


Aadded:

DRAC5 card 
6x3.5 Backplane
2 SAS 300GB HD
4 SATA 1TB HD


These changes would affect BIOS update?

0 Kudos
ptscon
Bronze

Re: Cannot use a "Dell System PE 2950" BIOS in a " - "

Jump to solution

GOT IT!

 

Found another post in this forum with identical issue and the poster mentioned eventually using "OEM BIOS".

So I looked for it and found it, according to compatibility info it said the only difference is theres no DELL splash screen at boot and logo inside BIOS.  My server did not have either of those already so it looks like it came with OEM BIOS originally.

Flashed it with the OEM BIOS and now it's running 2.5.0 Smiley Happy

0 Kudos
thaq
Copper

Re: Cannot use a "Dell System PE 2950" BIOS in a " - "

Jump to solution

I spent over 20 hours to find a solution.

My server came with IronPort IP2950 logo (when I boot).

Server didn't have CD/DVD, iDRAC or floppy options.

I bought CD/DVD and got a usb floppy drive.

I could run BIOS update from OS, CD/DVD(ISO) or floppy; but end up getting this error.

None of the solution worked for me.

But here is the solution that may work for others.

After the error you will be prompt to the ASmiley Embarassed

Just type (your bios version 2.7.0) ASmiley Embarassed020700 /FORCETYPE

Once completed, take the boot disk out from bay (I had a floppy; it may work with ISO file on CD/DVD) and reboot.

You will see new update; I did.

 

tonymarler
Copper

Re: Cannot use a "Dell System PE 2950" BIOS in a " - "

Jump to solution

Thank you thaq -  FORCETYPE did it for me... three days before eventually downloading FreeDos and booting via USB and then trying this.

0 Kudos
Not applicable

Re: Cannot use a "Dell System PE 2950" BIOS in a " - "

Jump to solution

Who has original ironport x1050 lastest bios? Can send it me? I flash 2.7 from dell and front panel display dell manufactured, not ironport :-(

0 Kudos
bryanb229
Copper

RE: Cannot use a "Dell System PE 2950" BIOS in a " - "

Jump to solution

The /FORCETYPE flag worked for me too on the 1950 after trying all the Windows based versions. Thanks for the help.

0 Kudos