Unsolved
This post is more than 5 years old
1 Message
0
962
Dell D330t 2360 Watt Redundant Pfc Power Supply For Poweredge M1000e
Hi All-
I am re-purposing a Dell D330t power supply (12 V at almost 200 A). The 4 high current blade power connectors on the back look like Molex brand connectors, but sadly are not. Does anyone know what the brand/model number is ??? Lots of time searching internet has not been fruitful so far.
The approximate dimensions of the power Blades are: 3.3mm thick x 18.1 mm tall
Pitch of the power blades is 10 mm
Pitch of the data pins is 0.1 inch
The dimensions of the metal support studs is 3 mm thick by 13.9 mm tall
The outer distance across the metal studs external dimension is 61.75 mm.
Pitch of the power blades is 10 mm
Pitch of the data pins is 0.1 inch
The dimensions of the metal support studs is 3 mm thick by 13.9 mm tall
The outer distance across the metal studs external dimension is 61.75 mm.
On top of the connector there was a bar coded sticker with the following numbers:
SO# 710069
The connector also had the number H243003000D6H
Any help would be most apprectiated
thx
jake