Unsolved
This post is more than 5 years old
1 Message
0
3176
Dell Poweredge 2850 POST Issue
Hi all,
Today i tried to boot POWEREDGE 2850 Server . After Dell logo came Its showing following informating and getting processing at that location
Validating device domain: 25%
Anybody got any ideas about this issue. kindly share the soulion for this problem.
Thanks in Advance
Regards,
Naveen
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
October 15th, 2012 09:00
Try clearing the NVRAM using the jumpers on the motherboard (near the system memory). If you don't know how, check the User's Manual under System Board Jumpers and Connectors. The try reseating all parts inside, especially the riser card (long card with blue release lever along left side).