Unsolved
This post is more than 5 years old
1 Message
0
588
Dell UPS Rack 3750W with management card
Hello
I am trying to set IP address on management card via rs232 console, on static setting I got message like this:
IAM - STATIC IPv4 address 192.168.33.140 on interface eth0 is in initial conflict!
This address will not be configured.
When I try dhcp setting , card won't obtain address and switch to static configuration, and I get message from above.
How can I fix this ?
Anonymous
274.2K Posts
0
August 12th, 2016 11:00
Hello.
Have you tried another IP address within the same subnet? You may either convert the management card with a static IP address to a DHCP client or in the DHCP server, exclude the static IP address from the DHCP scope. You will have to do this with rack turned off, else the conflict will persist.