Unsolved
This post is more than 5 years old
31 Posts
0
6632
ERA Question & Problem - PE 2650
I have several PE 2650 with different revision of firmware/bios. I use Ghost clone to make the windows boot. When I install era on all the server and run the OpenManage software, some server has the section for ERA configuration and some does not.
For the one that does not, I try to uninstall/install the ERA section with no luck. I'm able to access the ERA through the IP address configure on boot up.
And for some reason, the system summary shows all N/A. What can I do, try flashing the firmware for everything ?
DELL-Mark A
2.5K Posts
0
November 18th, 2003 16:00
Hi,
I would highly recommend the latest System BIOS, ESM Firmware as well as the latest ERA firmware to resolve this issue.
System BIOS, English, PowerEdge 2650, A16
FileName: PE2650-BIOSA16.exe [636 KB]
Release Date: 9/19/2003
http://support.dell.com/filelib/format.aspx?releaseid=R66581
ESM Firmware, PowerEdge 2650, A02
Filename: fwsBPa02.exe [112 KB]
http://support.dell.com/filelib/format.aspx?ReleaseID=R53488
ERA and DRACIII/XT, Firmware, v.2.50, A01
FileName: d_0721v250_bma.exe [2 MB]
Release Date: 8/28/2003
http://support.dell.com/filelib/format.aspx?releaseid=R64103