How to access all Dell M420 blades through iKVM!

Article Summary: 
How to access all Dell M420 blades through iKVM


What is happening?
The default view in iKVM shows the first M420 blade in the sleeve.  There are up to four M420 blades per sleeve.  The iKVM displays only one quarter-height M420 blade per sleeve at a time, and that view needs to be switched to view the other blades.  There is no need to update the iKVM firmware to access the other M420 blades in the sleeve.


The directions to access the other blades in a sleeve via the iKVM are available in the M1000e Owner’s Manual on page 31.

For the M420 model only, to toggle video between blades installed in a sleeve:

  1. 1.       Press <Print Screen> to launch the OSCAR interface (iKVM GUI).
  2. 2.      Select the slot where the sleeve and blade are installed and press <Enter> to exit OSCAR.
  3. 3.      Press <Scroll Lock> twice in quick succession to toggle between the quarter-height blades installed in the sleeve.


Full M1000e Owner’s Manual link: http://support.dell.com/support/edocs/systems/pem/12GOM/m1000e/en/m1000eomen.pdf



Get Support on Twitter: @DellCaresPRO

0 Kudos