13 Posts
0
2491
Multiple RAID-1
Dear experts, Bying a R740 with 2x1TB SATA and 4x8TB SATA disks. I want to set up 3 RAID-1. One for OS with the 1TB and 2x8 TB för DB and Logs. Do I have to configure all three RAID-1 as part of the initial setup or can I set up the one for the OS and then add the two RAID-1:s later? Thanks for your help. Mrtro
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
February 7th, 2019 06:00
Just configure the RAID 1 for the OS. Once the OS is installed, install the OpenManage Server Administrator software and configure the other VD's there (Storage, PERC, Virtual Disks, wizard link at the top of that page to create a new VD).
savvy2
2.5K Posts
0
February 7th, 2019 08:00
also read your PERC card manual, for using control +R , firmware way to build the first boot drive(s)