Unsolved
1 Rookie
•
11 Posts
0
724
PE T310 Raid Configuration
I recently purchased a PE T310, but after a few days it developed a fault and the supplier sent me another T310, I had to swap the memory and the drives which consist of 4 drives made up of 2 Raid 1 Array's. All of the drives have data on them, so how can I configure the new server's Raid Card (S110) so it mirrors the old server.
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
January 7th, 2019 06:00
First the RAID card (the S100 is NOT a "card") MUST be the same. If so, it should see the configuration on the drives and import it … or give you the option to IMPORT it in the configuration utility. If it is not the same RAID controller, it will not work.
Best option? Turn off the S100 controller and use non-RAID … restore your backup to that and mirror the drive in the OS. The S-series controllers are all garbage.