Highlighted
lpprikej
4 Tellurium

Power Consumption, M1000E with 8 blades, ESSA no good

Jump to solution

Hi all, anyone know why in the ESSA you can only configure an M1000E chassis with 1 or 16 blades?

I need to be able to show the max power consumption of a chassis with 8 blades. Just seems the ESSA has a glitch.

 

thanks

Jay

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Power Consumption, M1000E with 8 blades, ESSA no good

Jump to solution

 I was able to duplicate the issue. As an alternative solution, what you can use is the Data Capacity planner at

http://www.dell.com/content/topics/topic.aspx/global/products/pedge/topics/en/config_calculator?c=us...

Scroll down past the ESSA to the DCCP option.  From there, the chassis is already at 16 blades.  From here, you can remove 10 blades to get down to 6 to match your system.

Tags (2)
2 Replies
Anonymous
Not applicable

Re: Power Consumption, M1000E with 8 blades, ESSA no good

Jump to solution

 I was able to duplicate the issue. As an alternative solution, what you can use is the Data Capacity planner at

http://www.dell.com/content/topics/topic.aspx/global/products/pedge/topics/en/config_calculator?c=us...

Scroll down past the ESSA to the DCCP option.  From there, the chassis is already at 16 blades.  From here, you can remove 10 blades to get down to 6 to match your system.

Tags (2)
lpprikej
4 Tellurium

Re: Power Consumption, M1000E with 8 blades, ESSA no good

Jump to solution

ahh cool ty. that should do the job. I cannot select newer 610 blades but hopefully they miss the technicality 🙂

 

-Jay

0 Kudos