t2hieu
1 Copper

PowerEdge 2950 III server: Supports memory mirroring?

Jump to solution

Does PowerEdge 2950 III server support for memory mirroring?

I found that the PowerEdge 2000 III support for memory mirroring, but what about PowerEdge 2950 III, and where i can find techical specs for that?

Thanks in advance!

T2Hieu

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Dennis Smith
4 Tellurium

Re: PowerEdge 2950 III server: Supports memory mirroring?

Jump to solution

The system supports memory mirroring if eight or twelve identical memory modules are installed in the system. Mirroring must be enabled in the System Setup program and can be used only if memory sparing is not enabled. In a mirrored configuration, the total usable system memory is one-half of the total installed memory.

<ADMIN NOTE: Broken link has been removed from this post by Dell>

 

2 Replies
Highlighted
Dennis Smith
4 Tellurium

Re: PowerEdge 2950 III server: Supports memory mirroring?

Jump to solution

The system supports memory mirroring if eight or twelve identical memory modules are installed in the system. Mirroring must be enabled in the System Setup program and can be used only if memory sparing is not enabled. In a mirrored configuration, the total usable system memory is one-half of the total installed memory.

<ADMIN NOTE: Broken link has been removed from this post by Dell>

 

t2hieu
1 Copper

Re: PowerEdge 2950 III server: Supports memory mirroring?

Jump to solution

Thank Dennis, I found my answer.

Thanks.

0 Kudos