Unsolved
This post is more than 5 years old
2 Posts
0
538
PowerEdge 750
Ok, this question is for the PowerEdge 750 Guru's out there.. A friend send me one from Australia that didn't work upon arrival, now I'm not sure if it was from shipping or the fact that he said that it worked before he tried to blow it out of dust.. but now when I try and power it up, the fans kick on for half a second and the power button continues to flash..
I've nearly depleted all the processors and scaled the system back to barebones...Keep in mind, I've done my research to the extent that I'm almost pulling my hair out and have almost tried "everything" in every post...I've cleared the NVRAM setting, running only 1 stick of RAM and like I've said before, tried almost "every" processor that I have kicking around..
What am I missing??
What else can be done??
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
November 6th, 2016 08:00
Could be power supply, but probably the motherboard.
Mustang351cca
2 Posts
0
December 3rd, 2016 08:00
I think you're right as I bought another power supply and still the same thing... I'll look around for another motherboard, or fully inspect this one first to see if there is a loose connection somewhere..