I am using T620 at work. I am not sure if I have the GPU enablement kit installed. I bought Nvida K4000 and installed it according to https://www.youtube.com/watch?v=oqP1goE06u8 .
When I opened the T620, I didn't see anything like PCI power cables. T620 doesn't recognize the GPU card. Could you help me with it?
You likely need the GPU power cable, part number 3692K. I would start there.
Let me know if this helps.
Actually I am not sure that I am correct in my previous post, as the K4000 is a 30w GPU, so the power cable shouldn't be required. So that makes me think it is slot location. Would you confirm the slot you have the card installed, as it is only supported in slot 2 or 4 (single CPU configuration)?
Let me know.
Yes. What you highlighted is Slot 2. You can refer below links for details on GPU on T6620
The docs says the K(epler)4000 consumes up to 80 watt with is a little bit over the 70-75Watt a PCIe will deliver.
Also.. often are special bios settings needed when it comes to memory mapping. Is the K4000 supportet and if so did yo read the docs?