This post is more than 5 years old
5 Posts
0
24801
Precision R5400 Rack Rails Kit
Hi
Hoping someone can help here. I'm trying to find out what rails kit I'll need for a Precision R5400 Rack workstation to install in a standard (Non-Dell) Rack cabinet.
Can anyone point in the right direction with part no.'s etc? I'm thinking it may be the same chassis as Poweredge 2950...
Thanks in advance
Chris
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
May 10th, 2011 09:00
With the R5400, it comes with the Sliding Rapid/Versa Rails and Cable Management Arm for a universal rack. If for whatever reason it isn’t racking as intended, there could be the issue with the 3rd party rack as it offers both the versa and rapid rail options. What I might advise doing is going to: http://www.racksolutions.com to find something that will work with the rack you have.
linnhecreative
5 Posts
0
May 10th, 2011 09:00
Thanks - I didn't get the Rapid/versa rails with this machine and wasn't sure if it required anything special. That's great if it's those that's needed, I'll get them ordered.