I try to use IPMI (openIPMI from Linux) to set up boot method on R310 using standard BMC. I use following command, which seems to succeed:
#>ipmitool -l lan -U root -P calvin -H 10.80.237.176 chassis bootparam set bootflag pxeSet Boot Device to pxe
When I reboot machine it works indeed, but if I turn off and turn on the power it doesn't. Is there any way I can set up boot order from IPMI?
Try this one:
#>ipmitool -l lan -U root -P calvin -H 10.80.237.176 chassis bootdev pxe options=persistent
Set Boot Device to disk
This works on a Dell PowerEdge R210 II using standard BMC