Unsolved
This post is more than 5 years old
1 Message
0
2190
T330 & Perc H730
Dell site shows Perc H730 controller is compatible with the T330. However, I can't seem to find what cable(s) I will need to connect it to the back plane and motherboard???
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
January 17th, 2018 17:00
Hello
We have kits for swapping between hardware RAID controllers(H330, H730) on the T330, but we do not have kits for upgrading from the chipset controller to hardware RAID. Because this type of upgrade after-point-of-sale is not supported we do not have the cables available for sale as part of an upgrade kit. We only have the cables available through our spare parts sales.
The part number for the cable is P9VFY. I think that is the only cable you will need, but since this type of upgrade is not supported I don't have a list of all necessary parts, so I can't be sure.
Thanks
Confused T330 Owner
1 Message
0
June 19th, 2018 02:00
Hi Kluther,
Were you able to connect the Perc H730 to Poweredge T330?
If so, can you walk me through how you wired the two together?
I'm assuming you removed the wire from the S130, is that correct?
Thanks
kounalis
1 Message
0
September 21st, 2018 02:00
DELL T330 with PERC H 730 SUPPORT 8 HARD DISKD
400-ANWQ 8TB 7.2K RPM NL-SAS 12Gbps 4Kn 3.5in Internal Bay Hard Drive, CusKit?