Unsolved
This post is more than 5 years old
3 Posts
0
2446
T610 Power supply E1614 error
I have a T610 that every few months gets the following error "E1614 Power Supply 2 (870W) error" The server functions fine and I have powered the server with only Power supply 2 powered up with no problems. I have replaced the power supply and the error returns. I have to shutdown the server and remove the power cords from the power supply's and after boot up the error clears. Any suggestions on why the error returns would be helpful.
DELL-Chris H
Moderator
Moderator
•
8.4K Posts
0
April 7th, 2016 14:00
AJ_25,
I would start with verifying the server is currently up to date. Specifically the BIOS, iDrac , chipset, as well as the Lifecycle Controller. That will help to ensure it isn't a false error due to being out of date. Now if your system is really far behind the versions I sent then you will need to walk the versions to current, don't just jump to the last as it can cause issues.
Once the system is up to date, and the error returns, it may be an issue of the board.
Let me know what you see.