Highlighted
RLRH4
1 Nickel

VRTX - Networking unable to get to VLAN

Jump to solution

Hi, I have configured my VRTX with a trunk on 2 of the 10Gb connections and a trunk on the 1Gb connections. I configured it so that 2 vLANs were for the 10Gb trunk and 1 vLAN for the 1Gb trunk.

I am using VMware ESXi and I have configured 2 switches, switch 1 goes to the 2 vLANS on the 10Gb trunk and switch 2 goes to the vLAN on the 1Gb trunk. I then created 2 test VMs one pointing to the 10Gb trunk and one pointing to the 1Gb trunk. The VM for the 10Gb trunk is working fine but the 1Gb trunk is not giving me anything.

Any ideas would be welcome as I am out of them.

0 Kudos
1 Solution

Accepted Solutions
RLRH4
1 Nickel

Re: VRTX - Networking unable to get to VLAN

Jump to solution

We have fixed this, all we did was apply the same configuration but from the command line! Now it is working fine, go figure.

0 Kudos
1 Reply
RLRH4
1 Nickel

Re: VRTX - Networking unable to get to VLAN

Jump to solution

We have fixed this, all we did was apply the same configuration but from the command line! Now it is working fine, go figure.

0 Kudos