Unsolved
This post is more than 5 years old
1 Message
0
1476
Where to plug in new power switch on Dell PowerEdge SC1430
Hello! I recently purchased a used server from eBay, and it turns out that it is a Dell PowerEdge SC1430 motherboard and power supply in a new case with an upgraded CPU (Intel Xeon X5460, I think) and more RAM (4x4GB DDR2). However, when I received the server, it seems that the power button was disconnected during shipping. However, because it's not a standard motherboard, the front panel pins are just one big row, so I'm not sure where to plug in the power switch (it's just a standard two pin connector), or even just to short out the pins, just to get it to boot up once. Also, I don't have a Dell Service Tag or anything because I don't have the actual server, just the motherboard and power supply. Any help would be appreciated, thanks!
DellTom028
1 Message
0
September 27th, 2018 11:00
Connect(solder) to SW-POWER
(https://drive.google.com/file/d/1pGGyJn2uUZLlXpeLdMIZ9xnQWhcsjzCW/view?usp=drivesdk)
WEST WBN
2 Posts
0
February 23rd, 2022 23:00
Hello, were you able to solve the problem? The same thing happened to me, today I bought a motherboard but I don't know which way the power button goes. Sorry for my English, I use google translator.