Highlighted
Not applicable

clock speed. CPU

Jump to solution

Sorry for my English.
PowerEdge C6100.
CPUL5520 (2.27 GHz).
Inserted 3 nodes from 4.
Energy saving is disabled everywhere.
When I turn on 3 nodes at the same time, the clock speed of the CPU on one of the nodes drops to 1.5 GHz. This node uses the Windows Server 2016.

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator

RE: clock speed. CPU

Jump to solution

Hello

I would suggest testing in a supported operating system. You can also check the CPU frequency in the system BIOS to see what is detected.

There are several possible PSU configurations. If you are using a single PSU or low wattage PSUs then it may be throttling due to power limitations.

Thanks

Daniel Mysinger
Dell EMC, Enterprise Engineer

View solution in original post

0 Kudos
1 Reply
Highlighted
Moderator
Moderator

RE: clock speed. CPU

Jump to solution

Hello

I would suggest testing in a supported operating system. You can also check the CPU frequency in the system BIOS to see what is detected.

There are several possible PSU configurations. If you are using a single PSU or low wattage PSUs then it may be throttling due to power limitations.

Thanks

Daniel Mysinger
Dell EMC, Enterprise Engineer

View solution in original post

0 Kudos