16 Posts
0
382
iDRAC and SNMP
Hello,
I have installed ISM on my PowerEdge R730 and enabled SNMP for monitoring via PRTG, I can access iDRAC now via a browser on the local machine using the port 1266, but is it possible to access the iDRAC GUI via another computers interface? And if so, should it be reachable via that remote machines IP address and use iDRAC pass-through to communicate with the iDRAC system?
Hope my question makes sense, thanks.
DELL-Young E
Moderator
Moderator
•
3.6K Posts
0
January 26th, 2023 23:00
Hello, you can connect to iDRAC in the system that has iSM installed. And iDRAC's SNMP has no relation with OMSA.
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
0
January 25th, 2023 00:00
Once you installed iSM with "Accessing iDRAC via GUI, WS-Man, Redfish, and Remote RACADM" option you can remotely access iDRAC using OS IP address. Use https:// : to access iDRAC remotely. Refer below link with details
https://www.dell.com/support/manuals/en-hk/idrac-service-module/ism_4.1.0.0_user_guide/accessing-idrac-via-gui-ws-man-redfish-and-remote-racadm?guid=guid-e702ec87-b241-4f4a-9fac-b5bb7c2265ec&lang=en-us
Harry44
16 Posts
0
January 26th, 2023 21:00
Thanks DELL-Shine K,
With regards to using Dell specific probes for SNMP monitoring, I have enabled it in the Windows environment but is there anything that needs to be done in OSMA?