This post is more than 5 years old
6 Posts
0
2820
iDRAC6 Firmware Release 2.90 TLS Security Configuration
The release notes for iDRAC6 Firmware release 2.90 mention that TLS1.0 can be disabled via the CLI using the racadm command 'tlsencryptionstrength'.
Is there another version of racadm somewhere that provides this command as it is not available with the OpenManage 8.5 toolset released in March this year?
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
1
September 13th, 2017 01:00
You can run this command after connecting to iDRAC using SSH or using remote racadm. Currently this command is not supported from local racadm
adbl
6 Posts
0
September 13th, 2017 02:00
That worked via SSH. Thanks for the prompt reply
Cheers
baileybot
2 Posts
0
March 7th, 2018 06:00
can it be set to use only TLS 1.2
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
February 9th, 2021 22:00
I have upgraded firmware version of idrac6 to 2.92 . Can it be configured to use only TLS 1.2 now ?
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
0
February 10th, 2021 02:00
iDRAC 6 only support only "TLSv1.0 and higher" or "TLSv1.1 and higher" option for TLS Settings.