This post is more than 5 years old
2 Posts
0
3986
power supply SERVER PE710
hello
we are searching for a power supply that can replace the old code N870P-S0, for a server model PE710.
Any suggestions?
Thank you
Best regards
This post is more than 5 years old
2 Posts
0
3986
hello
we are searching for a power supply that can replace the old code N870P-S0, for a server model PE710.
Any suggestions?
Thank you
Best regards
Top
DELL-Chris H
Moderator
Moderator
•
8.4K Posts
0
May 23rd, 2017 05:00
SDGSRL,
The part number you need would be J98GF or YFG1C, they are the replacement for the original 870w power supply.
Let me know if this helps.
BotMan
101 Posts
0
May 23rd, 2017 10:00
Chris,
Could you please verify that the J98GF is an 870W supply? I was under the impression that this was one of the 570W versions.
Also, the 870W supplies in my R710 have a part number of VT6G4 (manufactured by Emerson, Model A870P-00), so the OP might want to know about these as well when searching for replacements.
Thanks.
paetsdellcc
29 Posts
0
May 23rd, 2017 17:00
Hello,sir!
You can check here:
http://www.parts-dell.cc/product-detail/dell-poweredge-r710-t610-870w-power-supply-0yfg1c-n870p-s0/
SDGSRL
2 Posts
0
May 24th, 2017 02:00
Hello,
thank you all for your replies.
I checked and the J98GF is a 570W as far as I've seen. We'll look for an 870W version, thank you!
Kind regards
DELL-Chris H
Moderator
Moderator
•
8.4K Posts
0
May 24th, 2017 05:00
I apologize, I am not certain why I listed J98GF, as it isn't an 870w.. As you stated there is VT6G4., as well as PT164.