My dell R710 doesn't wanna boot

Hello.

Let us try and bring the system to minimum to POST with the following components:

• System board
• Risers
• Processor (CPU1) with Heatsink
• Power Supply
• One stick of memory in dual in-line memory module (DIMM) slot A1
• Control Panel with cable

Ensure that the mouse, keyboard and other USB devices are disconnected.

Remove other things on the server and keep the following:

• System board
• Risers
• Processor (CPU1) with Heatsink
• Power Supply
• One stick of memory in dual in-line memory module (DIMM) slot A1
• Control Panel with cable

Remember to also remove the mouse, keyboard and other USB devices that are connected to the server and then boot the server. 

Let me know of any progress.

Hello, Thank you for fixing it,
Now i have another problem with my iDRAC 6 Enterprise Slow network speed (local 1gbps)
I will upload a video on my vps for you URL:  Sorry if the record is bad. if you really want a record of my workstation where i open the idrac console just ask me :)

XXXX  Video contains iDRAC network cfg information and hence removed by moderator for security reasons  XXXX

Check your network connections and ensure that the NIC firmware and drivers are up to date

Hello, that is fixed now and my vFlash is (2gb from Transcend) but he says its 512mb i saw you need a Dell sd card but they didn't sell that in the stores here ;/ is there an option for me to use the card what i bought 2gb? i need it.

Thanks.

Try another SD card from Kingston such as P/Ns 738M1 or JHJW9

I am not really sure, but you can test and see whether all memory will disk space will be detected.

Also i see this while using virtual media with an iso of 699MB (proxmox)

Thanks.

Ad how about SanDisk?

Provide more information about the virtual media and what you were trying to do.

Dear,

what will happen if i switch off the power on my dell R710 while he's running?

Specs:

2X xeon L5640 

6x 15K SAS 300GB Seagate Cheetah 15K.7 ST3300657SS, 300GB

72GB ECC Ram DDR3 PC3-10600r

2x power supply 870Watt

I don't know the motherboard.

iDRAC 6 Enterprise

Raid controller perc 6/i

OS: proxmox (virtualization)

(Im using it in raid 5)

Thanks.

Sorry, I didn't saw that reaction before my one, I was trying to upload an ISO to my server using virtual media.

Hello,

I mean with switch off an power outage.

Thanks