Unsolved
This post is more than 5 years old
3 Posts
0
143328
R730 Error : Installation of Windows 2008R2
Hi all,
I am using Dell Lifecycle to install Windows server 2008R2 and encountered error "Windows installation cannot continue because a required driver could not be installed."
I have performed a firmware update and it having the latest version.
Server Spec : R730 -
Intel Xeon E5-2650 v3 2.3GHz, 25M Cache, 9.60GT/s QPI, Turbo, HT, 10C/20T (105W) Max Mem 2133MHz
Chassis with up to 9, 2.5" Hard Drives
2133MT/s RDIMMs
4x 16GB RDIMM, 2133 MT/s, Dual Rank, x4 Data Width
2x 300GB 15K RPM SAS 6Gbps 2.5in Hot-plug Hard Drive 13G
PERC H730P Integrated RAID Controller, 2GB Cache
Dual, Hot-plug, Redundant Power Supply (1+1), 750W
I am new to the installation and need help. Thank you.
CalvinCheng
3 Posts
0
November 26th, 2014 00:00
More information :
Dell PowerEdge R730 and RAID 0 configured.
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
November 26th, 2014 07:00
1) Your Windows media is MOST likely bad, or 2) you have the embedded/chipset RAID controller is enabled - disable it or load the driver for it.
Why RAID 0?! How many disks?
CalvinCheng
3 Posts
0
November 26th, 2014 18:00
Hi hi,
Server is having 2 disks. Configured as RAID 0 as due to limit storage.
How can I disable RAID controller ?
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
November 26th, 2014 18:00
Can yo uh elaborate? What "limit" are you talking about. RAID 0 is just such a dangerous and normally unacceptably risky configuration.
Disable the RAID controller in the BIOS ... disable on board RAID or set onboard SATA to AHCI instead of RAID.
PolishPaul
1 Message
0
November 14th, 2016 17:00
Did you ever resolve this issue?