nfont
1 Nickel

Teaming dual nic on PE 2850

Jump to solution

Hello,

I'm having trouble teaming the two onboard intel pro 1000 nics. The Intel software that I can download won’t work because it first needs to install drivers ( dumb ) before it installs the management tool. Since these drivers are built with windows 7 and server 2008, intel software cannot find that they exist.  It has Windows Server 2008 R2 Standard installed.

Any ideas on how I could get them to team?

0 Kudos
1 Solution

Accepted Solutions
Highlighted
nfont
1 Nickel

Re: Teaming dual nic on PE 2850

Jump to solution

We were able to team the nics by using suggestions posted in this thread: communities.intel.com/.../6529

In the thread mentioned, Aras posted: "Yes you CAN team Pro 1000 MT adapters. There is just a trick.

Download latest PROVISTAX64.exe & PROWIN7X64.exe from intel

Extract contents of both to separate directories.

Go to device manager and update drivers and select browse and point to the folder you had PROVISTAX64 extracted to (make sure seach subfolders is on) and the drivers will be updated.

Then go to the PROWIN7X64 directory/apps/prosetdx/win7_x64/ and run prosetdx.msi

Teaming will now be available. After you create a team allow it a minute to initialize before you assign a static IP."

7 Replies

Re: Teaming dual nic on PE 2850

Jump to solution

which driver packages have you tried?

0 Kudos
nfont
1 Nickel

Re: Teaming dual nic on PE 2850

Jump to solution

I tried the driver package that is found here:  www.intel.com/.../cs-006120.htm but I receive an error message right off the bat saying the drivers can't be found.

I also tried the Broadcom BASP

0 Kudos
Moderator
Moderator

Re: Teaming dual nic on PE 2850

Jump to solution

Nfont,

Try this one - downloadcenter.intel.com/Detail_Desc.aspx

It is the 2008x64 version including ProSet, Proset is the teaming application you will need.

Chris Hawk

Dell | Social Outreach Services - Enterprise
Get Support on Twitter @DellCaresPro 
Download the Dell Quick Resource Locator app today to access PowerEdge support content on your mobile device! (iOS, Android, Windows)

0 Kudos
pcmeiners
4 Germanium

Re: Teaming dual nic on PE 2850

Jump to solution

Nfont...

I hope you are going for NIC fail-over, as a dual NIC teamed will not give you better performance (with Intels). If your after performance you need 4 ports to start to increase speed.

0 Kudos
nfont
1 Nickel

Re: Teaming dual nic on PE 2850

Jump to solution

I'll try what you suggested.  By teaming the NICs, I would like to increase the throughput and have failover capabilities

0 Kudos
pcmeiners
4 Germanium

Re: Teaming dual nic on PE 2850

Jump to solution

If you search carefully you can find papers of throughput on dual and quad teaming of Intel NICs, you get no throughput gain with duals, but quads you do get an appreciable gain.

0 Kudos
Highlighted
nfont
1 Nickel

Re: Teaming dual nic on PE 2850

Jump to solution

We were able to team the nics by using suggestions posted in this thread: communities.intel.com/.../6529

In the thread mentioned, Aras posted: "Yes you CAN team Pro 1000 MT adapters. There is just a trick.

Download latest PROVISTAX64.exe & PROWIN7X64.exe from intel

Extract contents of both to separate directories.

Go to device manager and update drivers and select browse and point to the folder you had PROVISTAX64 extracted to (make sure seach subfolders is on) and the drivers will be updated.

Then go to the PROWIN7X64 directory/apps/prosetdx/win7_x64/ and run prosetdx.msi

Teaming will now be available. After you create a team allow it a minute to initialize before you assign a static IP."