PowerEdge R730 Ram auf 320 GB erweitern

Hi,

das ist nicht ganz so einfach, hier Mal die Sepcs zur memory-Konfig:

• RDIMMs and LRDIMMs must not be mixed.
• x4 and x8 DRAM-based DIMMs can be mixed. For more information, please refer to Mode Specific Guidelines.
• Up to three dual- or single-rank RDIMMs can be populated per channel.
• Up to three LRDIMMs can be populated per channel regardless of rank count.
• Populate DIMM sockets only if a processor is installed. For single-processor systems, sockets A1 to A12 are available. For dual-processor systems, sockets A1 to A12 and sockets B1 to B12 are available.
• Populate all sockets with white release tabs first, then black, and then green.
• Populate the sockets by highest rank count in the following order — first in sockets with white release levers, then black, and then green. For example, if you want to mix single-rank and dual-rank DIMMs, populate dual-rank DIMMs in the sockets with white release tabs and single-rank DIMMs in the sockets with black release tabs.
• When mixing memory modules with different capacities, populate the sockets with memory modules with highest capacity first. For example, if you want to mix 4GB and 8GB DIMMs, populate 8GB DIMMs in the sockets with white release tabs and 4GB DIMMs in the sockets with black release tabs.
• In a dual-processor configuration, the memory configuration for each processor should be identical. For example, if you populate socket A1 for processor 1, then populate socket B1 for processor 2, and so on.
• Memory modules of different capacities can be mixed provided that other memory population rules are followed (for example, 4GB and 8GB memory modules can be mixed).
• Mixing of more than two DIMM capacities in a system is not supported.
• Populate four DIMMs per processor (one DIMM per channel) at a time to maximize performance.

Memory Configurations — Single Processor

Memory Configurations—Two Processors

Du siehst, es ist nicht ganz so einfach wie man denkt :D

Gruß
Stefan