Unsolved
This post is more than 5 years old
50 Posts
0
2212
ESXi 4.1->5.0 and PP/VE 5.4 -> 5.7 Upgrade
Anyone who upgraded ESXi 4.1 with PowerPath/VE 5.4 to ESXi 5.0 with PowerPath/VE 5.7 in place?
We are planning an upgrade of our ESXi 4.1 hosts which have PP/VE 5.4 SP2 installed to ESXi 5.0. I found out that we also have to upgrade PowerPath to 5.7 to work with vSphere 5.0. We intend to make an in place upgrade of the ESXi hosts to keep the configuration. But what about PowerPath?
Regards & Thanks in advance for hints!
daniel
Brion2
154 Posts
1
November 23rd, 2011 10:00
Hi Daniel. Before upgrading the OS from 4.1 to 5.0, you will need to remove PowerPath/VE 5.4 SP2. Once the OS upgrade is complete, you may install PowerPath/VE 5.7.
If you need more information, please let me know.
Thanks, Brion
danLE
50 Posts
0
November 23rd, 2011 22:00
Hi Brion,
thanks for the info.
What about the licensing? We use host based licensing. I assume that the ESX UUID will not change during the upgrade from 4.1 to 5.0. Do we need to convert the licenses?
Regards,
daniel
Brion2
154 Posts
1
November 24th, 2011 07:00
As long as the UUID remains the same, there is no need to change the Unserved license.
Thanks, Brion
Brion Stultz
EMC Corporate Systems Engineer
(cell) 508 498 4806
Sent from my iPhone
danLE
50 Posts
0
November 25th, 2011 07:00
sounds good ;-)