Unsolved
This post is more than 5 years old
6 Posts
0
1183
PowerPath VE 5.8
When I run rpowermnt display dev=all
Owner: default=SP A, current=SP A Array failover mode: 4
==============================================================================
--------------- Host --------------- - Stor - -- I/O Path -- -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
1 vmhba1 C0:T1:L84 SP B7 active alive 0 2
1 vmhba1 C0:T0:L84 SP A5 active alive 0 0
2 vmhba0 C0:T1:L84 SP B4 active alive 0 0
2 vmhba0 C0:T0:L84 SP A6 active alive 0 4
### HW Path | I/O Paths | Interf. Mode | State Q-IOs Errors |
==============================================================================
2 vmhba0 | C0:T1:L21 SP B4 | active alive | 0 | 4 |
2 vmhba0 | C0:T0:L21 SP A6 | active alive | 0 | 5 |
1 vmhba1 | C0:T1:L21 SP B7 | active alive | 0 | 3 |
1 vmhba1 | C0:T0:L21 SP A5 | active alive | 0 | 5 |
What dows the Q-IOs Errors mean?
Anonymous User
457 Posts
0
May 9th, 2013 08:00
Hi,
Regards,
Suman Pinnamaneni
wamatha
6 Posts
0
May 9th, 2013 08:00
Thanks Suman,
Since I am getting the errors as shown above, how can I fix this?