Highlighted
2 Bronze

ME4 create single Logical volume TB

Jump to solution

Hi 

Does ME4 RAID 6 or ADAPT for Storage A virtual 1 for (500TB) and Storage B virtual 1for (500TB) able to combination to single logical large volume 1PB

Alan_Ting_1-1593480848239.png

 

0 Kudos
Reply
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator

Re: ME4 create single Logical volume TB

Jump to solution

Hello Alan_Ting,

You can’t combine storage pools that are owned by different controllers.  since you are needing 1PB you will have to do it via CLI.  Here is the link to the support matrix & if you look on page 7 it states the following “ Maximum usable virtual pool size per controller module = 512 TiB with the large pools

feature disabled in the CLI and 1 PB with the large pools feature enabled in the CLI” https://dell.to/3gaJWab

Here is also a link to the CLI guide. https://dell.to/3iabT3E

Please let us know if you have any other questions.

View solution in original post

Reply
1 Reply
Highlighted
Moderator
Moderator

Re: ME4 create single Logical volume TB

Jump to solution

Hello Alan_Ting,

You can’t combine storage pools that are owned by different controllers.  since you are needing 1PB you will have to do it via CLI.  Here is the link to the support matrix & if you look on page 7 it states the following “ Maximum usable virtual pool size per controller module = 512 TiB with the large pools

feature disabled in the CLI and 1 PB with the large pools feature enabled in the CLI” https://dell.to/3gaJWab

Here is also a link to the CLI guide. https://dell.to/3iabT3E

Please let us know if you have any other questions.

View solution in original post

Reply