Unsolved
This post is more than 5 years old
2 Posts
0
13209
md3200 issues
First i am unable to connect through MD manager. Do both management ports need to be configured and connected? Enclosure shows up in 6g adapter but thats it.
Second, one encloure has a controller on lockdown. Using Putty and unable to use clear command--or not sure when to use it. After break and S, nothing happens.
DELL-Daniel Ca
243 Posts
0
July 8th, 2015 09:00
Hello, scsinuts.
First, it is strongly recommended that you cable both management ports, yes. Here's a guide I think you'll find helpful. Starting on page 16 it will give you 'dual controller' configuration suggestions.
downloads.dell.com/.../powervault-md3200_Deployment%20Guide_en-us.pdf
Second, the lockdown mode is a little more tricky. There are several things that can result in a 'lockdown' on a controller, ranging from 'no big deal' to 'bricked box expensive paper weight'. SO, what we need is a screen capture of the boot screen. Using Putty, and your serial cable boot the controller (or reseat it) and capture the output to text, and send me that in an email. (I'll send you an email to which you can reply)
Let me know. Looking forward to hearing from you.