Highlighted
ragemedia
1 Nickel

T5610 and low voltage memory compatibility; DDR3 PC3L; 1.35v

Jump to solution
Hello, I need put 8x16BG memory to my T5610 workstation. I found good offer on memory, but PC3L 12800R, this modules work on low voltage 1.35 V. Is it possible that it will work? Somebody help!? Smiley Wink Thanks! Marcin
0 Kudos
10 Replies

Re: T5610 and low voltage memory compatibility; DDR3 PC3L; 1

Jump to solution

It's not stated what brand RAM you're looking at.  Crucial is highly recommended as it's guaranteed to work in Dell's if using non-Dell RAM.  Kingston Value Brand (KVR) almost never works in Dell's.  The volts can be off in off-brands.

If you don't know already, be sure all the RAM sticks are the same capacity, MHz, and brand.

- Please consider giving posts you like a thumbs up.
- Please "Accept as Solution" posts that are a solution.

I'm a big fan of Dell, a Dell user, and not an employee. This forum is mainly user to user with occasional moderation or additional knowledge by a Rockstar or Dell employee.
0 Kudos
ragemedia
1 Nickel

Re: T5610 and low voltage memory compatibility; DDR3 PC3L; 1

Jump to solution

Thank for reply.
I want to bay 8x Samsung DDR3 16GB PC3L 12800R M393B2G70DB0-YK0.

0 Kudos

Re: T5610 and low voltage memory compatibility; DDR3 PC3L; 1

Jump to solution

T5610 Owner's Manual

T5610 Spec Sheet

Though I know some people use Samsung RAM in their Dell's, I couldn't find anything to say that your T5610 can take low voltage memory.

Make sure the memory you buy comes with a return policy in case it doesn't work.

Also, according to pg. 43 of the Owner's Manual, Memory modules of different sizes can be mixed (for example, 2 GB and 4 GB). But, all populated channels must have identical configurations. • Memory modules must be installed beginning with the first socket. 

- Please consider giving posts you like a thumbs up.
- Please "Accept as Solution" posts that are a solution.

I'm a big fan of Dell, a Dell user, and not an employee. This forum is mainly user to user with occasional moderation or additional knowledge by a Rockstar or Dell employee.
0 Kudos

Re: T5610 and low voltage memory compatibility; DDR3 PC3L; 1

Jump to solution

One idea is to verify with Samsung through their website, like by chatting for example, if your T5610 can take the memory you want.  I tried chatting, but they were too busy at the time I tried.

- Please consider giving posts you like a thumbs up.
- Please "Accept as Solution" posts that are a solution.

I'm a big fan of Dell, a Dell user, and not an employee. This forum is mainly user to user with occasional moderation or additional knowledge by a Rockstar or Dell employee.
0 Kudos

Re: T5610 and low voltage memory compatibility; DDR3 PC3L; 1

Jump to solution

Hi @bmcowboy,

Not that I wanted to pest again, but do you think the above memory will work in a T5610?  I don't know if 1.35v is the normal voltage for it or not.  Samsung sent an email back that didn't answer the compatibility question.

Thanks, bradthetechnut

- Please consider giving posts you like a thumbs up.
- Please "Accept as Solution" posts that are a solution.

I'm a big fan of Dell, a Dell user, and not an employee. This forum is mainly user to user with occasional moderation or additional knowledge by a Rockstar or Dell employee.
0 Kudos
bmcowboy
3 Zinc

Re: T5610 and low voltage memory compatibility; DDR3 PC3L; 1

Jump to solution

Hey dude,

This memory module able to run at both 1.35v and 1.5v. Check this out.Screenshot_20190206-085747_Chrome.jpg

However, it's non-ECC RAM and I'm afraid not compatible with T5610. Check this out.20190206_090414.jpg

 

“May the Force be with Dell.”
0 Kudos
ragemedia
1 Nickel

Re: T5610 and low voltage memory compatibility; DDR3 PC3L; 1

Jump to solution

Hi!!

Thanks for your help Smiley Happy

I think this samsung module is ECC, in all offer I see ECC information.
Look:
https://www.amazon.com/Samsung-Memory-M393B2G70DB0-YK0-Registered-1-35V/dp/B00KR8QR66

What you think?

Thanks!!

0 Kudos
bmcowboy
3 Zinc

Re: T5610 and low voltage memory compatibility; DDR3 PC3L; 1

Jump to solution

Hi @ragemedia ,

Sorry for my overlooking. Yes, it's an ECC RDIMM. Official Spec Sheet tells it all:

1.JPG

 

Besides, somewhere here listed as compatible memory module with T5600. It should be fine with your T5610.

 

“May the Force be with Dell.”
0 Kudos
bmcowboy
3 Zinc

Re: T5610 and low voltage memory compatibility; DDR3 PC3L; 1

Jump to solution

Hi @ragemedia ,

One more reference for you. The original Dell 16GB 2Rx4 DDR3L RDIMM 1600MHz module for T5610 is this one with part number SNP20D6FC/16G.

1.JPG

“May the Force be with Dell.”
0 Kudos