3 Posts
0
3109
T5610 and low voltage memory compatibility; DDR3 PC3L; 1.35v
Hello, I need put 8x16BG memory to my T5610 workstation. I found good offer on memory, but PC3L 12800R, this modules work on low voltage 1.35 V. Is it possible that it will work? Somebody help!? ;) Thanks! Marcin
bmcowboy
573 Posts
0
February 12th, 2019 09:00
Hi @ragemedia ,
Sorry for my overlooking. Yes, it's an ECC RDIMM. Official Spec Sheet tells it all:
Besides, somewhere here listed as compatible memory module with T5600. It should be fine with your T5610.
bmcowboy
573 Posts
0
February 12th, 2019 21:00
Hi @ragemedia ,
One more reference for you. The original Dell 16GB 2Rx4 DDR3L RDIMM 1600MHz module for T5610 is this one with part number SNP20D6FC/16G.
bradthetechnut
6 Professor
6 Professor
•
7.3K Posts
0
February 3rd, 2019 21:00
It's not stated what brand RAM you're looking at. Crucial is highly recommended as it's guaranteed to work in Dell's if using non-Dell RAM. Kingston Value Brand (KVR) almost never works in Dell's. The volts can be off in off-brands.
If you don't know already, be sure all the RAM sticks are the same capacity, MHz, and brand.
ragemedia
3 Posts
0
February 4th, 2019 02:00
Thank for reply.
I want to bay 8x Samsung DDR3 16GB PC3L 12800R M393B2G70DB0-YK0.
bradthetechnut
6 Professor
6 Professor
•
7.3K Posts
0
February 4th, 2019 13:00
T5610 Owner's Manual
T5610 Spec Sheet
Though I know some people use Samsung RAM in their Dell's, I couldn't find anything to say that your T5610 can take low voltage memory.
Make sure the memory you buy comes with a return policy in case it doesn't work.
Also, according to pg. 43 of the Owner's Manual, Memory modules of different sizes can be mixed (for example, 2 GB and 4 GB). But, all populated channels must have identical configurations. • Memory modules must be installed beginning with the first socket.
bradthetechnut
6 Professor
6 Professor
•
7.3K Posts
0
February 4th, 2019 15:00
One idea is to verify with Samsung through their website, like by chatting for example, if your T5610 can take the memory you want. I tried chatting, but they were too busy at the time I tried.
bradthetechnut
6 Professor
6 Professor
•
7.3K Posts
0
February 5th, 2019 13:00
Hi @bmcowboy,
Not that I wanted to pest again, but do you think the above memory will work in a T5610? I don't know if 1.35v is the normal voltage for it or not. Samsung sent an email back that didn't answer the compatibility question.
Thanks, bradthetechnut
bmcowboy
573 Posts
0
February 5th, 2019 17:00
Hey dude,
This memory module able to run at both 1.35v and 1.5v. Check this out.
However, it's non-ECC RAM and I'm afraid not compatible with T5610. Check this out.
ragemedia
3 Posts
0
February 12th, 2019 07:00
Hi!!
Thanks for your help :)
I think this samsung module is ECC, in all offer I see ECC information.
Look:
https://www.amazon.com/Samsung-Memory-M393B2G70DB0-YK0-Registered-1-35V/dp/B00KR8QR66
What you think?
Thanks!!
bradthetechnut
6 Professor
6 Professor
•
7.3K Posts
0
February 13th, 2019 12:00
Some of those Dell prices are through the roof. Crucial RAM comes highly recommended as it's guaranteed to work in Dell's. I think you'll find a better deal. T5610 Crucial RAM