Unsolved
This post is more than 5 years old
2 Posts
0
32854
004-332 Restart Printer on 3100cn
Before replacing the drum on this 3100cn, I blew out the stray toner with compressed air. When the printer is turned on, its display says "Diagnosing", then "Please Wait", then "004-332 Restart Printer", then "Contact Support IfMessageReturns". The printer will give the same messages each time I cycle power. I have read many posts related to this subject. I do not see any broken or bent parts inside the printer. I have removed and reseated each toner and the drum. I continue to receive the previously mentioned messages. Any help would be appreciated.
DELL-Jimmy P
1.5K Posts
0
January 27th, 2009 15:00
Rickwa64
Try following the . To save you some time, when you get to the list of error messages yours is 5th from the bottom of the list.
Rickwa64
2 Posts
0
January 28th, 2009 07:00
Thanks for the link. I tried all the suggestions but nothing resolved the problem. I continue to get 004-332 Restart Printer. The last option pointed to contacting tech support. It is out of warranty so I will probably recycle it.
KlausHuse
1 Message
0
August 18th, 2011 05:00
The link is dead: