dax44
1 Copper

5110cn, transfer roller, reset?

 
I've got a new transfer roller on order from Dell for the 5110cn, but the printer is dead until then. Any way to reset this so I can keep printing for a few days, even if quality is not as good?
0 Kudos
6 Replies
brooksby1
1 Copper

Re: transfer roller on 5110cn - any way to reset?

There are two tabs on the back of the transfer roller.  Release these and push the white gears on the top right as you are looking at the unit from the tab side.  Push the white gear to the left to unseat it and then remove the assembly.  Vacuum out the toner and clean the window and then reassemble.  Will work like a charm.

brooksby1
1 Copper

Re: transfer roller on 5110cn - any way to reset?

There are two tabs on the back of the transfer roller.  Release these and push the white gears on the top right as you are looking at the unit from the tab side.  Push the white gear to the left to unseat it and then remove the assembly.  Vacuum out the toner and clean the window and then reassemble.  Will work like a charm.

0 Kudos
Petey4335
1 Copper

Re: transfer roller on 5110cn - any way to reset?

You sir are a time and money saver.  Worked like a charm.  I was amazed at the amount of toner that was in the transfer roller.

0 Kudos
peterhuppertz
1 Copper

RE: transfer roller on 5110cn - any way to reset?

You're a gun. 

Like the previous poster, I was amazed at the quantity of toner in the transfer roller unit. The printer is working like it just came out of the box. 

Thank you, thank you. Thank you. 

0 Kudos
Highlighted
Chrispy.Cannon
1 Copper

RE: transfer roller on 5110cn - any way to reset?

Thank you - I was stuck on a Sunday trying to print and this saved me - great help

0 Kudos
tru9740
1 Copper

Re: transfer roller on 5110cn - any way to reset?

This was an incredible help. Dude you just saved me at least $109. Thank you so much.

0 Kudos