Unsolved
This post is more than 5 years old
15 Posts
0
3732
AIO 964 Mem card reader?
Does anyone know if the SD reader will read SDHC v.2; (cat 4 & cat 6)? These new cards have higher speeds, maybe FAT32 vs. FAT format, and may not be reverse compatible w. SD v. 1.0 & 1.1.
PudgyOne
9 Legend
9 Legend
•
30.3K Posts
0
November 27th, 2008 03:00
GKI610,
On pages 32 and 33 in the 964 printer manual, you'll see what the 964 printer supports.
***Please note***
The printer manual was written in July 2005, so if research is done, it's highly unlikely that the printer would support the cards at higher speeds. You could try an experiment and try it, but it is doubtful.
Rick
GKI610
15 Posts
0
December 19th, 2008 06:00
Thanks. I thought the age factor would be the consideration I was asking about, since those SDHC cards weren't around then. I don't have a 'nice cheap' one lying around to try, so this was my only help.
GKI
PudgyOne
9 Legend
9 Legend
•
30.3K Posts
0
December 19th, 2008 07:00
I used a 2 gig SD card I got from Office Max and it works.
Rick