E.T. ELEC
1 Copper

Dell 962 AIO

I have a Dell 962 AIO Printer that gives me an error code '2200' when i attempt to make a photo copy of anything or if i try to fax something. The printer will print and receive faxes but will not copy or send faxes. What can i do to resolve this error code?

Tags (1)
0 Kudos
1 Reply
Highlighted
Moderator
Moderator

Re: Dell 962 AIO

E.T. ELEC,

 

Sorry for the delay. I had to look deeply for this from an older forum thread.

 

Overview

The 2200 error message indicates a scanner stall or jam. The steps below will help you to resolve the issue and clear the error message.

Printer Reset


1 Power off the All-In-One (AIO) and remove the power supply from the back of the unit. Wait 30 seconds. Then reinsert the power supply and power the AIO on.

Did the error message return?

 

Yes: Continue to step 2.


No: Attempt a test scan. If the error message does not reappear, the error is resolved.



2 Power off the AIO and remove the power supply from the back of the unit. Open the scanner cover. Check the scanner glass for cracks and the scanner casing for cracks. Close the scanner lid. Open the top cover of the AIO. Using the carrier belt, move the cartridge carrier to the middle of the unit. Remove both cartridges, close the top cover, reinsert the power supply, and power the AIO on.

Did the error message return?

 

Yes: contact Dell.
No: Continue to step 3.



3 Power off the AIO and remove the power supply from the back of the unit. Open the top cover of the AIO. Using the carrier belt, move the cartridge carrier to the middle of the unit. Insert the color cartridge, close the top cover, reinsert the power supply, and power on the AIO.

Did the error message return?

 

Yes: Repeat step 3 with another color cartridge. If the printer fails again, continue to step 4.


No: Repeat step 3 and install the black/photo cartridge. If both cartridges are installed, attempt a test scan. If the error message does not reappear, the error is resolved.



4 Power off the AIO and remove the power supply from the back of the unit. Open the top cover of the AIO. Using the carrier belt, move the cartridge carrier to the middle of the unit. Remove the color cartridge and insert the black/photo cartridge. Then close the top cover, reinsert the power supply, and power the AIO on.

Did the error message return?

 

Yes: Repeat step 4 with another black/photo cartridge. If the printer fails again, contact Dell.


No: Install the color cartridge. If the printer fails, contact Dell. If the error message does not appear with both cartridges installed, attempt a test scan. If the error message does not reappear, the error is resolved.

 

 

Rick

#DellRockstar

What is a Dell Service Tag and how do I locate it? 

Original poster, If you have solved your problem, can you please mark the correct thread(s) with your solution. Thanks 

Welcome to Dell Community!

#DellWorld 2012

#DellWorld 2015

#DellEMCWorld 2016

#MicrosoftMVP - Windows Expert-Consumer April 1, 2012 to March 31, 2015

Tags (1)
0 Kudos