This post is more than 5 years old
27 Posts
0
1051
Port Required for a Federated ProSphere (two sites)
Hi,
I'm on a new deployment of ProSphere 2.0.1 in two different sites, this two instances of ProSphere will be federated using a second NIC. I need to fill a customer format, specifying the ports necessary for the federation, the ProSphere 2.0 Ports Usage and Worksheet from EMC support page is ambiguous, I need to know exactly what ports are used to communicate two instances ProSphere Appliance. Something similar to the attached image.
Regards.
Jose Luis
ConorLawlor
233 Posts
0
August 21st, 2013 01:00
Hi Jose Luis,
Federated traffic between ProSphere instances used these ports:
Port Name & Number
Protocol
Flow Direction
Target IP
Target Host
Port Name & Number
Notes
Port # Information
https
443
TCP
Bi-Directional
https
443
Used for all ProSphere VMs to ProSphere VMs communications
Static
Vminframon
30011
TCP
Bi-Directional
30002 - 30011
Uses Dynamic Ports
Dynamic
Regards
Conor
christopher_ime
2K Posts
0
August 17th, 2013 00:00
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and questions can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "ProSphere Support Forum" depending on what model you own.
Jose_Luis_OV
27 Posts
0
August 21st, 2013 09:00
Thanks Conor,
Regards