Unsolved
This post is more than 5 years old
4 Posts
0
4862
2161DS Annoyance
Hi,
We have 2 blade enclosures connected to our 2161DS, a 1855 and 1955, both have a full complement of servers and both have a digital access KVM module, so we connect via the custom connector.
They appear as a tiered switch however I cannot select a 10 port switch, I have to choose a 16 port switch. We end up with 12 ports that don't exist.
Is there any way an option for a 10 port tiered switch can be added ??
Thanks
Robert
Avocent
104 Posts
0
April 24th, 2009 17:00
Robert,
You may want to check both versions of firmware on the blade KVM card and the Dell 2161DS. If I am not mistaken there was a firmware fix for this which was a couple of years ago. Here is awebsite to download the latest version of firmware for the Dell 2161DS.
http://dell.avocent.com/index.php?option=com_phocadownload&view=category&id=4:&Itemid=49