Unsolved
This post is more than 5 years old
7 Posts
0
952
Buy A New Server
Hi
I have two server poweredge t610 and t620 and i will buy a t630
Are this hard disk below work fine with the old servers.
1.8TB 10K RPM SAS 6Gbps 3.5in HYB CARR,13G.
1.8 TB 15K RPM EXIST? ARE IT SUPPORTED BY OLD SERVERS.
sorry for my bad english.
Regards
Asaid83
7 Posts
0
April 23rd, 2018 00:00
I have two server poweredge t610 and t620 and i will buy a t630
i read in datasheet for t610 that it support max SAS 600 GB 15 K hard disk is that right?
Are this hard disk below work fine with the old servers.
1.8TB 10K RPM SAS 6Gbps 3.5in HYB CARR,13G.
1.8 TB 15K RPM EXIST? ARE IT SUPPORTED BY OLD SERVERS.
sorry for my bad english.
Regards
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
April 23rd, 2018 09:00
Hello
You will need part numbers to check compatibility.
Asaid83
7 Posts
0
April 26th, 2018 05:00
hello
i am asking about diffrence between hard disk like
Dell 10,000RPM SAS 12Gbps 512e 2.5in Hot-plug Hard Drive 3.5in HYB CARR - 1.8TB
and another one without 512e feature
they wrote that not support vmware this is right?
this type of hard better from normal one ?
what advantage and disadvantage for this type?
thank you.
Asaid83
7 Posts
0
April 26th, 2018 05:00
thank you
AlxRocha
1 Message
0
April 26th, 2018 06:00
Hi,
In T610 Tech Guidebook (http://www.dell.com/downloads/global/products/pedge/en/server-poweredge-t610-tech-guidebook.pdf), you will find supported hard drives.
You can connect another disks (of course, you need to check disk controller RAID support, for example) and mix disks types (supporteds and not). And don't forget caddy size and connection. But, doing it, you dont' have Dell Support for this disk.
My advice to you: for production environments, use supported disk. And for test and others, go ahead; mix and test. And send your impressions and feelings for us.