Unsolved
1 Message
0
6213
DELL PowerEdge R510 iDrac Update
Hi, I want to update below server model iDrac firmware only. But not able to find right latest iDrac firmware. DELL PowerEdge R510 iDrac Please help to get this. Thanks.
Unsolved
1 Message
0
6213
Top
DELL-Chris H
Moderator
Moderator
•
8.4K Posts
0
November 30th, 2018 07:00
Suraj Karande,
You can run the iDRAC6_2.91_A00_FW_IMG.exe version found here. After running you will see a file named firmimg.d6, you can use that to update from the iDrac web interface, as seen here.
Hope this helps.
AMERO911
1 Message
0
September 21st, 2020 13:00
i need help!!please
my server
bios 1.14.0
iDrac 1.80 (Build 17
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
0
September 21st, 2020 18:00
Can you reboot iDRAC and try again. Your current iDRAC firmware is very old. Hence I also suggest to try some intermediate firmware instead of directly updating from 1.80 to 2.92 version.
If above did not worked you can try iDRAC6_2.92_A00_FW_IMG.exe file. This is a self extractable file. Once extracted you will get firmimg.d6 file and this file can be used in iDRAC GUI to update iDRAC firmware.
Fmslick
11 Posts
0
June 19th, 2021 20:00
I would like to add there is a error with the Linux copy of this. https://www.dell.com/support/home/en-us/product-support/product/poweredge-r510/drivers
/tmp/PER510_IDRAC6_FRMW_LX_R239776.BIN-15965-4177/spsetup.sh: line 124: source: buildVer.sh: file not found
DELL-Joey C
Moderator
Moderator
•
3.1K Posts
0
June 20th, 2021 21:00
Hi,
Could you check your current iDRAC version? PER510_IDRAC6_FRMW_LX_R239776.BIN seems to be a very old version.
You can check it here: https://dell.to/3gJOeIG