Highlighted
2 Bronze

IDSDM module.firmware update on ESXI

Hello all, 

Thanks to help

I need to apply the update below

 

https://www.dell.com/support/home/us/en/19/drivers/driversdetails?driverId=FF4WY&osCode=W12R2&produc...

 

Please help on how to apply the update on ESXI server

The installation instructions says *Firmware can only be updated through OS via DUP. Update will be unsuccessful if done through iDRAC or LC.*

 

0 Kudos
4 Replies
Highlighted
Moderator
Moderator

Re: IDSDM module.firmware update on ESXI

Hi, You will have to boot to our linux live image and run the update from there. https://www.dell.com/support/home/us/en/04/drivers/driversdetails?driverId=C31J4&osCode=XI65&product... https://downloads.dell.com/FOLDER04262253M/1/Firmware_FF4WY_LN_1.7_A02.BIN


Thanks,
DELL-Josh Cr
Dell EMC Enterprise Support Services
Get support on Twitter @DellCaresPRO
#IWork4Dell
0 Kudos
Highlighted
1 Copper

Re: IDSDM module.firmware update on ESXI

I'll just comment that this reply to use SLI with a link to the BIN image doesn't really help, since SLI doesn't have SUU in it, or a helpful link within SLI to install it from the network.  (Correct me if I'm wrong here, but the SLI UI doesn't really point you in the right direction, and I was done with trying to piece together the various PDF manuals.)

What SLI 3.0 _does_ have is a script in ~root to install "DSU," which can fetch all applicable firmware for you, and it works fairly well.

This is how I finally got the IDSDM firmware installed, along with the Intel NIC and QLogic HBA firmware that is hit-or-miss from within iDRAC.

Now if SLI had a better UI for network configuration than Redhat's "made for a laptop" NetworkManager, that'd be fantastic.  I'm guessing most people with ESXi servers and iDSDM also have separate management VLANs, and NetworkManager has no way to configure this.

Highlighted
1 Copper

Re: IDSDM module.firmware update on ESXI

You can also update IDSDM from iDRAC (Maintenance > System Update > From Local (use 32bit update exe).

This was for a 14G server with current iDRAC (3.34.34.34) to get to SD FW version 1.9 (was on 1.7)

0 Kudos
Highlighted
2 Bronze

Re: IDSDM module.firmware update on ESXI

Can you please verify what OS you did this for?   The 32 bit .exe for Vmware ESXi?

 

"You can also update IDSDM from iDRAC (Maintenance > System Update > From Local (use 32bit update exe).
This was for a 14G server with current iDRAC (3.34.34.34) to get to SD FW version 1.9 (was on 1.7)"

 

 

0 Kudos