Solved! Go to Solution.
It sounds like you are using the OS deployment feature in the LifeCycle Controller. The virtual disk wizard in the OS deployment is only intended to create a single virtual disk to install the OS. You should create the second virtual disk after deployment. If you want to create multiple virtual disks before deployment then create them before using the deployment wizard and skip that step during OS deployment.
You can find manuals on the system support page. Controller manuals can be found on the controller support page. I think you can have more than one disk type on the H330, but you can verify by reviewing the manual.
Dell EMC, Enterprise Engineer
Get support on Twitter @DellCaresPRO
Thank you for your help, you are spot on. It seems that the issue was the order in which the virtual disks were created.
For future reference, the order of actions that got it right was:
- Enter LifeCycle Controller and create your main RAID configuration (the one with O/S on)
- Install your O/S
- Enter BIOS, Device Manager, and create your other RAID configurations