R430 PCIe retainer clip

Hello https://dell.to/43gO29Q,

Thank you for the image. Unfortunately that is not a Dell part number.

I was wanting an image of the riser(s) that the clip goes in. There should be a sticker with the DP/N number on it.

part number: 542.00A01.0001 CAV1

the clip goes between the chassis and the cage.

the part number for the chassis isn't obvious.  I did find this part number on the chassis, near the cage:

And the cage part number: 533.00A0G.0001

Hello https://dell.to/3Cf5zTG,

Young may be correct. I also mentioned that I am not finding the clip as a separate part number from the riser.

I'm still checking in to it a little more. I can update you when I find something.

Hello https://dell.to/45XhRxS,

This is still a work in progress. I'll update you when I have more information.

Noted and thank you for not giving up.

Hello https://dell.to/3P3Cang,

I am still checking into this.

How many broken retainer clips do you have?

Can you provide:  System Model, Which riser and an image could help also.

Hello iss.software,

Unfortunately,  there is not a separate part number for the retainer clip.

We have about 5 systems with a broken clip. They are quite fragile.

The images are at the upper part of this thread.

If the individual clip cannot be purchased then what about the cage assembly?

Hello https://dell.to/43Q3o5u,

Yes you could replace the riser that it is a part of.

Check the risers you have with broken clip for a sticker, likely on the underside, for a DP/N number and that is the part number you need.

The one for this R430 system is

Part #:7N2YT

Part Desc.:ASSY,MECH,RSR,LPF+LPF,R430

ASSY Riser Card, Left +Right Low Profile, 8 slots, Support 2 half length PCI 3.0 cards

That is a Service Part number. You would need to contact Sales and ask for the Spare Parts department to order. It does not come up on the Dell web pages.