Unsolved
This post is more than 5 years old
17 Posts
0
1088
Disaster Recovery plan
Hi All,
I am new to RP over here but in need to help out with a customer on RP question. Hopefully some expert can help me out with some noob questions.
We're running RecoverPoint 4.1.1. Installad on VNX5200. Using vRPA and trying to protect VM
1. May I know what happens if there is disaster occur in Prod site but I would need to bring my DR back online ? May I just directly mount up volume and put them to work ?
2. How may I perform a "proper disaster " ? We would like to perform a failover testing that simulate disaster occur and we only have access on the DR site.
Any documents and comments will be greatly appreciated
Rgrds
Alvin
forshr
1.1K Posts
1
August 7th, 2017 02:00
Hi Alvin,
The easiest way would be to log onto the RP UI in the DR site, navigate to Manage Recovery Actovities and initiate the Testing and Failover option.
Regards,
Rich
AL_IST
17 Posts
0
August 7th, 2017 18:00
Thanks Forshr
Now this make perfect sense to me. I was lock in my mind that only in Prod UI , I can perform the Testing and Failover option
AL_IST
17 Posts
0
August 10th, 2017 20:00
Hi, just one more question
If I initialise the first sweep with bandwidth_limit=50 , may I half way during the initialsation, change the limit ?
Would my initial sweep be reset back and redo all over again ?
forshr
1.1K Posts
0
August 11th, 2017 05:00
No problem with this as it is dynamic.
Regards,
Rich