Unsolved
This post is more than 5 years old
10 Posts
0
1498
Recovery Point change IP setting
I trying change in second site Recovery Point IP setting with new range but after change and apply new setting i get error
unable to excuted command, RPA is attached...
Any idea what means this error?
Thanks..
etaljic81
1K Posts
0
May 31st, 2012 08:00
You need to detach the RPA from the cluster, change the IP(s), apply the settings and than attach the RPA to the cluster.
EhudKaldor
29 Posts
0
May 31st, 2012 08:00
To make any changes to RecoverPoint configuration, you need to detach it from the cluster, and reattach after. This option is from the main menu (cluster operation). Also, don’t forget the changes are not propagated automatically, so you need to make the change on all RPAs.
Thank you,
Ehud
DA
117 Posts
0
May 31st, 2012 09:00
Starting with RecoverPoint 3.5, IP changes can be done online.
gunslinger2
10 Posts
0
June 27th, 2012 07:00
Okay, I'll bite, how do you change them online in 3.5? Through boxmgmt? Can you elaborate more on this please?
etaljic81
1K Posts
0
June 27th, 2012 07:00
Through deployment manager. When you launch deployment manager you'll see an option called "System Modification Wizard." That will allow you to change IPs